Friday, November 20, 2020

Tips to Prevent Falls and Injury When Working On Scaffolding

One of the main intent of scaffolding is to enable construction workers or tradespeople to get to difficult to reach places so they can perform certain tasks, When scaffolding is well installed and used correctly in the right way, it is a great asset and helpful structure; at the same time it can also present many risks and dangers as a direct result of working at a height. Caution or Danger tape should be used in an attempt to keep people away from risk. There is a possibility to be struck by falling tools, materials, or debris and there is the danger of being close to overhead power lines which could lead to electrocution. The site Supervisor, Manager, and scaffold inspector should take the responsibility that a project site is a safe place to work also every precaution has been taken to reduce the risk that comes with working at a height.

Try to avoid working at a height: Sometimes you can get the job done without having to work at a height and you must assess whether it’s a necessity before work begins as working at a height should be avoided, where possible. This is best by carrying out a comprehensive risk assessment before you start the work to identify the dangers and what decisions need to be put in place to reduce risks. If there is an alternative method available, or the risk is far too high, then working at height should not go ahead.

Inspect your scaffolding: Scaffolding inspection is important and should be carried out immediately after the scaffolding has been erected and before any work is carried out on it to ensure that it is safe, and then weekly thereafter. A thorough inspection will identify any weaknesses or dangers in the structure. Before erecting the scaffold, a number of aspects must be regarded. The amount of weight the scaffold will be required to hold including the weight of the scaffold itself, materials, and workers must be considered while and before starting the work.

Provide appropriate training to the workers:  All the employees who work on scaffolds must be provided with proper training. The training must include identifying and preventing fall hazards, falling tools and materials hazards, and knowledge of electrical hazards as well. Before commencing the work, all workers should be provided with the appropriate training for working at heights. Doing this can ensure that workers are aware of their responsibilities and the safety measures steps they need to follow to prevent a fall or injury while doing work, as well as being educated on how to properly use the equipment will be protecting them which may include helmets, harnesses, and fall arrest kits.

Keep workspaces arranged neatly: A clean and arranged work environment doesn’t just make working quicker and easier, it can keep workers safer too. scaffolding collapse mainly occurs when there is poor housekeeping across all industries, but particularly in construction where tools, working materials, and debris can often be left laying around which presents a trip hazard. By simply encouraging site workers to arrange up after themselves and keep walkways clear, so Keeping workspaces arranged neatly, you can greatly reduce the risk of an accident.

Assess your surroundings and the environment: Another hazard that can lead to accidents is particularly when strong winds, blowing materials, and debris off scaffolding and onto the ground. Therefore, any work from a height should be stopped when there is dangerous weather expected, including strong winds, heavy rain, thunderstorms, and snow. It is also common for those working at height to be disclosed to overhead power lines which present the latent danger of electrocution. This should be completed before work begins, and the danger will be identified in any risk assessment that takes place, it will need to be communicated to the worker so that they are aware of these hazards.

Don’t cut corners: The most important thing is that you should take the time and care to ensure that training, equipment, inspections are all done properly. Don't sacrifice site safety for fast, convenience, or cost, and always take the time to be as thorough as possible, even if it delays the work completion. The safety of workers and site visitors is the most important part of your job so seeking the advice and support of a professional team can also help ensure that falls and injuries are prevented.

Our first and foremost priority is the safety of both our staff, on-site workers, and members of the public.


Pondhan Scaffolding is the leading provider of scaffolding in Bangalore, India. we are experts in designing, manufacturing, and exporting a wide range of scaffolding items which includes Cuplocks. The wide range of products offered by us is Centering Sheets / Column Boxes, Telescopic spans, Adjustable Props, Adjustable Spans, Jacks, Scaffolding Units, Heavy Duty Adjustable Props, and so on. Further, we focus on all kinds of Steel Fabrication and Structural Work.

Our products are manufactured as per the International Standards, which are ISI marked with superior quality raw material and advanced production technology. This helps us in maintaining our place in the industry as a trustworthy manufacturer. For more information on our scaffolding services visit:

TAGS: Scaffolding Suppliers in Bangalore, Shuttering Material for Sale in Bangalore, Scaffolding for Sale in Bangalore, Shuttering plate manufacturers in Bengaluru, Centering Plates in India, Best Scaffolding Accessory Dealers in Bangalore, Top scaffolding props & spans in India, Centering Material for rent in Bangalore, Scaffolding Accessories Bangalore, scaffolding rental services India

No comments:

Post a Comment

Rent a Scaffolding for Construction Work

Scaffolding is a fundamental need of the building industry and businesses that build structures. Cleaning, renovation, and structural repair...